bing tracking image

Ford Flex Tow Bar Braking Systems Installation And Review Videos

     

Demco SBS Stay-IN-Play DUO Braking System Installation - 2019 Ford Flex- Video

Demco SBS Stay-IN-Play DUO Braking System Installation - 2019 Ford Flex

Hello neighbors, it's Brad here at etrailer and today we're taking a look and installing the Demco Stay-IN-Play DUO proportional braking system on a 2019 Ford Flex. Now there's five main components required for flat towing a vehicle, and the first one's gonna be on the vehicle side and that's gonna be your base plate and that's gonna create a solid attachment point to the frame of the vehicle that allows you to hook up to your tow bar. And the tow bar is gonna be the connection between the base plate on the towed vehicle and the hitch on the RV. You also have your safety cable, so just in case of an accidental disconnect you still have an attachment point from your baseplate to the hitch on the RV. You also have your braking system which will allow you to slow and stop at the same time that your RV goes. And also you have a breakaway cable. more


Watch Video

12/19/2022 7:57:39 AM



Roadmaster InvisiBrake Supplemental Braking System Installation - 2010 Ford Flex- Video

Roadmaster InvisiBrake Supplemental Braking System Installation - 2010 Ford Flex

Today on our 2010 Ford Flex, well be installing the Roadmaster InvisiBrake Supplemental Braking System part number RM-8700. Were going to begin here by showing you this particular vehicle has adjustable pedals. We need to make sure that the pedals are adjusted so that they are as close to the seat as possible. Once you have this adjusted, you will not be able to use your adjustable pedals any longer once you install the InvisiBrake system. Next, were going to go ahead and choose the location where were going to mount the InvisiBrake controller box. In this case, were going to mount it underneath the driver side seat. Its best to push it forward as far as possible, that way, the passenger and the rear seat does not kick or damage the box. Before we drill any holes, we need to make sure when choosing a location that theres nothing around it that could be damaged when we mount it or route our wires to or from the box. When we have our location of our box chosen, next well go up here underneath the dash. more


Watch Video

3/4/2014 12:33:29 PM



  1